◎ High strength at room temperature and high temperature; ◎ High porosity and large filtration capacity; ◎ Stable mass production technology, stable product quality.

◎ Excellent high temperature performance, operating temperature up to 1750℃; ◎ High strength at room temperature, not easy to drop slag; ◎ Stable quality, high porosity, good filtration effect.

Foam ceramic filter plate is mainly used for continuous purification of aluminum water with good deep filtration effect.

FIBER FILTER CLOTHSProduct features:◎ This product is made of glass fiber and other high temperature resistant materials and can be cut into any size required.Performance indicators:ModelOperating temperature(≤℃)Continuous working time (s)Normal temperature tensile strength ≥ (kg/4 wires)ApplicationXWF-11450108Iron castingXWF-2850206Non-ferrous alloy castingXWF-31560416Small steel castingsXWF-417001016Steel castingsMesh thickness: 0.35mm, porosity: 50~60% Mesh: 1.5*1.5, 2.0*2.0, 2.5*2.5.

1. Lower material cost; 2. Lower transportation costs; 3. Easier procedures; 4. Longer shelf life; Suitable for all kinds of iron castings, steel castings and non-ferrous alloy castings, belonging to sintered peeling coating, coating and casting automatic peeling. Non-sticking sand, easy to clear sand, can reduce the casting cleaning workload.

Water-based / Alcohol-based CoatingsWater-based and Alcohol-based Coatings are widely used for iron, steel and alloy castings.CharacteristicsExcellent thixotropy and leveling property, tight and smooth coating layer, adequate room temperature and high temperature strength, guarantees the quality of the casting roughness.Low gas emission, proper shielding properties, reduce the air hole defects on the casting.The coating layer and the casting will separate automatically, decrease the cleaning wor

Model Number: 60%~75% Application: steel making Shape: lump,granule,powder Material: Ferro Silicon Chemical Composition: Si , Fe , Al , Ca , P , S , C

Name: FeSiMg/Ferro Silicon Magnesium Usage: Casting, Foundry, Spheroidizing, Nodulizing FeSiMg is a kind of good nodulizer. Sometimes it also contains Rare Earth elements. With strong mechanical strength, the effect of deoxidization and desulfurization is strong. It's widely used in the metallurgic industry.

Name: Barium Silicon Usage: Casting, Foundry, Spheroidizing, Nodulizing Barium Silicon can be used as deoxidizer and desulfurizer in steelmaking production. When it's used in gray cast iron and spheroidal graphite cast iron, it promotes the formation of A-shaped graphite and the completion of graphite nodules.

Name: Cored Wire Usage: Steelmaking, Deoxidizer, Desulfurizer Cored wire is made by the band steel alloy powder, and widely used in ladle refining process for deoxidizing and desulfurizing.

Name: Recarburizer Usage: Recarburizer, Carburant, Carbon Additive Recarburizer is a carbon material using for carburization of steel and cast iron in the high temperature. Low content of Nitrogen is a significant characteristic of the material. Recarburizer is used to adjust the carbon content of the steel while it is still liquid before casting.

Name: Petroleum Coke Usage: Carbon Additive Petroleum coke is a by-product of petroleum refining. It is a coke product converted from crude oil by distillation to separate light and heavy oil, and then the heavy oil undergoes thermal cracking.

Name: Slag Remover or Slag Coagulant Usage: slag removal for casting iron or steel Slag remover is a material used to remove impurities in molten iron or molten steel in steelmaking or casting. Its main components are SiO2, Al2O3 and so on. The general deslagging agent has the function of heat preservation and covering.

Cold Box ResinCold Box Resin binder system consists of three parts: Part I Phenolic Resin, Part II Polymeric Isocyanate, Part III Triethylamine.CharacteristicsPerformance advantages:Higher strength, better water resistance, easier stripping, less mold sticking, better fluidity for the mixture, longer bench life, faster curing speed, better toughness and collapsibility on high temperature, lower free formaldehyde, reduce benzene class gases by 70%.Benefits for users:Less resin addition rate, lowe

CO₂ Cured Alkaline Phenolic ResinCO₂ Cured Alkaline Phenolic Resin binder system consists of two parts: Part I Alkaline Phenolic Resin, Part II CO₂.CharacteristicsFree of Nitrogen, Sulfur, Phosphorus harmful elements, which is especially suitable for the production of steel alloys, carbon steel and ductile iron castings, avoid foundry defects caused by N. S. P. etc.Good thermosplasticity for the sand mold, keep off hot crack defects for steel alloys, carbon steel and ductile ir

Ester Cured Alkaline Phenolic ResinEster Cured Alkaline Phenolic Resin binder system consists of two parts: Part I Alkaline Phenolic Resin, Part II Organic Ester Curing Agent.CharacteristicsThis binder system doesn’t contain harmful foundry elements: Nitrogen, Sulfur, Phosphorus, etc., which is especially suitable for the production of steel alloys, carbon steel and ductile iron castings.The binder system has second curing under high temperature and good thermo plasticity, which can reduce hot

Better environmental performance, low odor when working, less smoke. Excellent fluidity of the mixture, easy for manual or mechanical sand filling, good roughness of casting surface and high dimensional accuracy. Excellent hardening properties, easy for demoulding, good thorough-hardening properties, sand core (mold) with excellent normal & high temperature properties. Suitable for production of steel, iron and nonferrous castings with excellent quality records. Sand core (mold) is easy collapsible, reclaimable and reduces the consumption of original sand.

Sulfonic Acid Catalyst – Hardener for No-bake Furan ResinSulfonic Acid Catalyst is the matching hardener for No-bake Furan Resin. Users could choose different models according to different requirements.CharacteristicsAccording to the different room temperature and sand temperature, users could choose different models of hardener to get satisfactory curing speed.By adjusting the addition rate of the hardener (30-60% of Resin), you can get different bench life and stripping time.Light yellow or b

No-bake Phenolic Urethane ResinNo-bake Phenolic Urethane Resin binder system consists of three parts: Part I Phenolic Resin, Part II Polymeric Isocyanate, Part Ⅲ Curing Agent.CharacteristicsExcellent fluidity of the mixture, easy for manual or mechanical sand filling, good roughness of casting surface and high dimensional accuracy.Rapid curing speed, no water generated during reaction, curing homogeneously with excellent thorough-hardening.Sand core (mold) is with good collapsibility and easy t

1. good refractoriness 2. excellent thermal shock and thermal spaling resistance. 3. high cold compressive strength 4. good resistance to abrasion and corrosion